Bell - K.1 Pro SA2015 Racing Helmet

  • Bell - K.1 Pro SA2015 Racing Helmet - A0047
  • Bell - K.1 Pro SA2015 Racing Helmet - A0047
  • Bell - K.1 Pro SA2015 Racing Helmet - A0047
  • Bell - K.1 Pro SA2015 Racing Helmet - A0047
  • Bell - K.1 Pro SA2015 Racing Helmet - A0047
  • Bell - K.1 Pro SA2015 Racing Helmet - A0047
  • Bell - K.1 Pro SA2015 Racing Helmet - A0047
  • Bell - K.1 Pro SA2015 Racing Helmet - A0047
  • White
  • Matte Black
  • Red Graphic


Extra Shield:

Aero Kit:

Helmet Bag:

Retail: $499.95
Price: $424.95
    Discontinued item with limited sizes remaining. Please check options above for current availability.

    The K.1 Pro is a multi-use, full-featured helmet with superior ventilation, aero styling with Bell’s aggressive chin bar design for less lift and buffeting at speed.

    The K.1 Pro's aero features enhance the helmet's aerodynamic stability in high-speed racing environments. The Snell SA2015 rated K.1 Pro is a great helmet for open wheel racers, closed car racers and kart racers who demand superior features including light weight, excellent fit and multiple ventilation options.

    The K.1 Pro features a lightweight composite shell, comfortable interior fit and maximum ventilation with full chin bar, forehead and top vents. The K.1 Pro takes a 287 SRV Shield and each helmet comes with a clear shield and Bell visor strip as standard equipment.

    The K.1 Pro also features Bell's redesigned face piece with recessed areas that allow for seamless radio integration and easy installation. The helmet is available in a Rubberized Matte Black finish - the rubberized surface is more resistant to finger prints and smudges than traditional flat finishes. The K.1 Pro has M6 Terminal Hardware installed and is ready for use with head and neck restraint devices.

    While the K.1 Pro has a front aero lip and chin bar designed into the helmet and included, additional optional spoilers are available to enhance helmet performance and provide greater stability at speed. The aerodynamic kits prevent lift and improve overall helmet stability. Because of the way airflow accelerates at higher speeds, Bell recommends using larger size gurneys at lower relative speeds and medium or smaller gurneys as speeds increase. The aero kits attach with double sided adhesive that holds aggressively to the shell yet can be removed easily without damaging the helmet's finish.

    Available with the following optional Aero Kits:
    • Aero Kit - Low Speed:
      • 2022126 – REAR SPOILER V.06 CLEAR (LARGE)
      • 2505104 – 2 MIL Tearoffs (20PK)

    • Aero Kit - High Speed:
      • 2022127 – REAR SPOILER V.09 CLEAR (MEDIUM)
      • 2505104 – 2 MIL Tearoffs (20PK)

    Detailed Specs:
  • Multi-use Helmet with Aerodynamic Features
  • Lightweight Composite Shell Technology
  • Aggressive Chin Bar Styling
  • Standard Eyeport Size
  • Superior Chin Bar, Forehead & Top Ventilation
  • Recessed Face Piece for Seamless Radio Integration
  • 287/3mm SRV Shield (SRV-1 Pivot System)
  • Synthetic Rubber Gasket Seal
  • E-max Plus Multi-density Liner
  • Black Comfort-Plus FR Interior
  • M6 Terminal Hardware for Head and Neck Restraint Devices
  • Snell SA2015 Certification
  • Take several measurements. The largest measurement is the one you want to use.

    Proper helmet fit is vital to the performance of a helmet. For the helmet to perform properly during an impact, it must stay securely on the head. Due to varying shapes, heads that are apparently the same size when measured may not necessarily fit the same size helmet. A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a tape measure.

    Measure the circumference of the head at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement.

    Sizing Notes: Sizing varies between brands. Please check the sizing chart for *each* item.

    Notes A: Snell SA2015 Rated Helmet
    Notes B: Karting / Auto Racing Dual Use Snell-Rated Racing Helmet
    Snell Rating: The Snell SA2015 standard certifies a helmet for use in competitive auto racing until the year 2025. It is also accepted by most karting and motorcycle racing organizations.
    Eyeport Size: Standard
    Shield Type: 287/3MM SRV-1

    Snell SA2015, Full Face, Youth Helmets, Open Cockpit, HANS-Ready, Youth Sizes, Auto Racing, Drag Racing, Karting, Closeouts
    Part Number #: 14200##